Maintenance And Cleaning; Appendix - Futurelight Scan SC-330 Mode D'emploi

6. Maintenance and cleaning

It is absolutely essential that the projector is kept clean and that dust, dirt and smoke-fluid residues must not
build up on or within the projector. Otherwise, the projector's light-output will be significantly reduced. Regular
cleaning will not only ensure the maximum light-output, but will also allow the projector to function reliably
throughout its life.
A soft lint-free cloth moistened with any good glass cleaning fluid is recommended, under no circumstances
should alcohol or solvents be used!
DANGER!
Disconnect from the mains before starting any
maintenance work
The front mirror and objective lens will require weekly cleaning as smoke-fluid tends to building up residues,
reducing the light-output very quickly. The cooling-fan should be cleaned monthly.
The gobos may be cleaned with a soft brush. The interior of the projector should be cleaned at least annually
using a vacuum-cleaner or an air-jet.
The dichroic colour-filters, the gobo-wheel and the internal lenses should be cleaned monthly.
To ensure a proper function of the gobo-wheel, we recommend lubrication in six month intervals. The quantity of
oil must not be excessive in order to avoid that oil runs out when the gobo-wheel rotates.

7. Appendix

We hope you will enjoy your SC-330/SC-370. We can assure you that you will enjoy this device for years if you
follow the instructions given in this manual.
Should you have further questions, do not hesitate to contact your local dealer.
© 7/98
2 0