Sentiotec PRO B Serie Mode D'emploi page 37

Instructions for use for the user
9.10. Cancelling the preset time function
● Press and hold down the preset time button
to cancel the preset time function.
► The preset time countdown is cancelled.
► Then the current temperature in the sauna room is displayed in the
temperature display
is displayed.
9.11. Cancelling the post-drying programme
After the combi-mode, the post-drying programme is started automatically. This
involves heating the sauna room to 80 °C with the fan running for 30 minutes.
The text "dry" appears in the temperature display
● Press and hold down the temperature selector
press) to cancel the post-drying programme.
To prevent mound and rot from forming, the post-drying programme
should NOT be cancelled.
9.12. Saunabetrieb ausschalten
● Drücken Sie auf den Temperatur-Wähler
► The sauna heater is switched off. After the combi-mode (min. 6 minutes),
the post-drying programme is started automatically.
9.13. Switching off the sauna control unit
● Press the ON/OFF switch
► The humidity display
► The sauna control unit is switched off.
. In single-sensor mode, the preset temperature
4
3
, to switch off the sauna control unit.
6
and the temperature display
1
for three seconds (longpress)
7
.
4
for three seconds (long-
3
.
4
p. 33/38
EN
go out.