SQlab 310 3.0 Mode D'emploi page 19

Intended Use
The various models of SQlab handlebars have been developed depending on the model for the different areas of application MTB Tour
& Travel, Trekking and City Comfort and have been tested accordingly in numerous tests. Overloading and damage to the handlebars is
influenced by the nature of the ground traveled, the driving skill, the driving style, the rider's weight or the total system weight and other
special events, such as driving errors, falls and accidents. When describing the intended use, we follow the international categorizations
ASTM F2043- 13/ DIN EN 17406, which describe the different areas of use as precisely as possible.
Model Designation
SQlab Handlebar 310 3.0
SQlab Handlebar 302 3.0
SQlab Handlebar 321 3.0
Category 1 according to DIN EN 17406
Refers to bicycles and EPACs used on normal paved surfaces on which the tires are intended to maintain
ground contact at average speed, with occasional drops.
Average speed in km/h
Maximum drop/jump height in cm
Intended use
Bike type
Category 1 according to ASTM F2043-13
Bicycles/attachments in this category are used exclusively on paved paths and roads, with the wheels in
constant contact with the ground.
Category 2 according to DIN EN 17406
Refers to bicycles and EPACs for which condition 1 applies and which are also used on unpaved roads and
gravel paths with moderate uphill and downhill gradients. Under these conditions, contact with uneven
terrain and repeated loss of tire contact with the ground may occur. Drops are limited to 15 cm or less.
Average speed in km/h
Maximum drop/jump height in cm
Intended use
Bike type
Category 2 according to ASTM F2043-13
Bicycles/attachments in this category can also be moved on gravel and unpaved roads with moderate
gradients in addition to the operating conditions specified in category 1. Rougher terrain in this category may
result in brief loss of tire contact with the ground. Jumps (drops) from a height of max. 15 cm may occur.
Maximum Application
permissible category according
system weight to ASTM F2043-13
180 kg Category 3
180 kg Category 2
180 kg Category 1
15 - 25
< 15
Commuting and leisure riding
City & Urban Bikes
15 - 25
< 15 cm
Leisure rides & trekking
Trekking & touring bikes
Application
eBike Ready
category according
certification
to DIN EN 17406
Category 3
Category 2
Category 1
Yes
Yes
Yes