TechniSat DIGITRADIO 140 Manuel D'instructions page 51

14.6 Software update
From time to time software updates may be provided which could contain improvements or bug fixes. The DIGITRADIO is kept
permanently up-to-date in this way.
> Go to MENU > System settings > Software update.
> If the DIGITRADIO 140 is to search periodically for new software versions, go to [Auto update] and select > [YES], or
select [NO] if this is not to be carried out automatically.
> Select [Check now], if you want to check directly whether a new software version is available.
If a software update has been located, follow the instructions on the display.
In order to find and upload software updates, the radio must be connected to the Internet.
Do not switch the DIGITRADIO 140 off during the update process!
14.7 Set-up wizard
The set-up wizard starts automatically after switching on the DIGITRADIO 140 for the first time, after retrieving the factory
settings, or can be launched manually in MENU > System settings > Set-up wizard. Go to Section 4 to see how to configure the
set-up wizard.
14.8 Info
In MENU > System settings > Info you can see the software version currently installed in the device as well as, for
>
example, the Spotify version.
14.9 Display illumination
> Via MENU > System settings > Illumination, you can retrieve the settings for the display illumination.
> Select [Operating mode] or [Standby mode] in order to carry out the setting for operation or standby.
> You can now set the brightness for operation in three steps from High, Medium to Low and for standby in [Display
illumination] to High, Medium, Low and Off.
EN
FR
IT
NL
NW
DK
PL
CZ
SK
51