TechniSat DIGITRADIO 140 Manuel D'instructions page 47

14.2.2 Connection via WLAN
To configure the network connection via WLAN, you have the option of using the network wizard or of doing so manually.
14.2.2.1 Network wizard configuration
> Select [Network wizard] to launch this.
The network wizard now searches for all the WLAN networks within range and displays them to you.
> Then select your WLAN network.
You can now choose whether to use the WPS function or whether you prefer to enter your WLAN password manually.
> If you would like to use the WPS function, launch it on your router as per the instruction manual and then select [Press
button] in the network wizard.
Please observe the display overlays. The connection process is generally completed after a few seconds and the WLAN
connection can be used.
> If you wish to enter your WLAN password manually, or if your router does not support the WPS function, select [Skip WPS].
> Then enter your WLAN password using the virtual keyboard display and confirm your selection with OK.
The entered password is now verified. This process is generally completed after a few seconds and the WLAN connection
can now be used.
14.2.2.2 Configuration via WPS function
This establishes a direct connection to the router. Selecting and/or entering a WLAN network (SSID) and password is not
required.
> Start the WPS function on your router as per the instruction manual.
> Then select [PBC Wlan structure] to launch the connection process.
EN
FR
IT
NL
NW
DK
PL
CZ
SK
47