Télécharger Imprimer la page

TechniSat DIGITRADIO 140 Manuel D'instructions page 36

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 60
11 Audio input
You can play sound from an external device via the DIGITRADIO 140.
Connect the external device to the Audio input (19) on the DIGITRADIO 140.
>
>
Press the MODE button as often as required until [Line in] is shown on the display.
Alternatively:
>
Press the MENU button and then select Main menu > Line in.
For an optimum volume setting, use the volume control on the radio, as well as the one on the connected device.
Take into account that, when the volume setting is very low on the connected device and the volume setting on the radio
is higher, irritating noises/murmurs are amplified accordingly and can be heard more clearly. It is recommended that the
volume on the DIGITRADIO 140 is set on e.g. a DAB+ or USW station, switch to audio input and then to adjust the volume
on the connected device in such a way that the overall volume of the audio input corresponds approximately to the
volume of the DAB+/USW station. As such, you can also avoid considerable volume differences when switching between
the functions on the DIGITRADIO 140.
12 CD/MP3 player
12.1 General information on CDs/MP3 CDs
The device is designed for music CDs that are played with audio data (CD-DA or MP3 for CD-R and CD-RW). MP3 formats must
be created with ISO 9660 Level 1 or Level 2. Multi-session CDs cannot be read.
In MP3 mode, the terms "Folder" = Album and "Track" are critical. "Album" corresponds to the folder on the PC, "title" of the file
on the PC or a CD-DA track. The device sorts the albums or the tracks of an album into alphabetical order by name. If you prefer
a different order, change the name of the track or album and place a number in front of the name.
When burning a CD-R and CD-RW with audio data, various problems can arise which could occasionally compromise smooth
playback. This is caused by faulty software and hardware settings or the blank disc being used. Should such errors arise, you
should contact your CD burner/burner software manufacturer or search for the relevant information, e.g. on the Internet.
36

Publicité

loading