TechniSat DIGITRADIO 140 Manuel D'instructions page 44

13.3.1 Displaying details
This menu shows the current grouping status.
Here you can determine things such as whether the DIGITRADIO is connected as a server or client in a group.
13.3.2 Creating a new group
> Start by entering a group name using the virtual keyboard shown.
> Then select the devices you wish to add to the group.
An * identifies devices already added to the group.
Only devices with multi-room support and located in the same network as the DIGITRADIO 140 are shown.
13.3.3 Add to group
Use this menu to add more devices to an existing group.
In order to be able to add devices, a group must first of all have been created.
Only devices with multi-room support and located in the same network as the DIGITRADIO 140 are shown.
13.3.4 Show clients
This menu shows you all the devices belonging to the group (clients). It is also possible to remove clients from the group.
To do so, select a device you wish to remove from the list and remove it by pressing the OK (9) button on the remote
>
control.
13.3.5 Exit group
Use this menu item to exit the current group.
44