13.3.6 Delete group
This menu item deletes the current group and releases all the devices added to the group again.
13.4 Using headphones
Do not listen to music at a high volume when using headphones. Doing so can cause permanent hearing impairment. Turn
down the radio volume to the lowest volume before using headphones.
>
Only use headphones with a 3.5 mm jack plug.
>
Insert the headphone connector in the headphone socket (12) on the front of the DIGITRADIO.
When the headphones are connected, the sound is played via the headphones and the audio outputs at the same time.
Volume adjustment also occurs in parallel.
14 System settings
The system settings are equally applicable to all sources.
>
To access the system settings, press the MENU button and select > System settings.
14.1 Equaliser
In order to adjust the sound of the DIGITRADIO 140, the equaliser is available with the preset tuning of Middle, Classic, Rock,
Pop and Jazz.
>
Via MENU > System settings > Equaliser you can access the equaliser settings.
Alternatively:
Press the EQUALISER (EQ.) button on the remote control (19), to directly access the equaliser settings.
>
Select the desired equaliser setting and press the OK button.
>
An * highlights the current Selection/Setting.
EN
FR
IT
NL
NW
DK
PL
CZ
SK
45