TechniSat DIGITRADIO 140 Manuel D'instructions page 34

> Using the p or q buttons, select a memory slot between 1 and 30 and press the OK button. [saved] appears on the
display.
Alternatively:
> Press one of the number buttons 1 - 10 and keep it pressed until [saved] appears on the display.
> Repeat the process to save other stations.
9.7 Selecting the programmed stations
Briefly press the PRESET button.
>
Using the p or q buttons, select a memory slot between 1 and 30 and press the OK button to play the station saved
>
there.
Alternatively:
> Press the desired number button1 - 10. If no station is saved in the selected programme slot, [Memory slot empty]
appears.
9.8 Deleting a saved memory slot
> Simply save the new station in the respective channel slot as described in Section 9.6.
10 Bluetooth
10.1 Activating the Bluetooth mode
> Press the MODE button as often as required until [Bluetooth audio] appears on the display.
Alternatively:
> Press the MENU button and then select Main menu > Bluetooth.
If you are in a submenu, select the main menu as described in Section 3.7.
In the status bar of the display, a flashing
34
indicates the pairing mode.