Publicité
Les langues disponibles
Les langues disponibles
The front "Master" cooking zone can be used in
combination with the corresponding "Secondary" cooking
zone at the back
(to check which zones are equipped with this function, see
the illustrated part of this manual).
To activate the Bridge Function:
- simultaneously select the two cooking zones you
want to use
- the Bridge indicator (20) of the "Secondary" cooking
zone lights up "
"
- by means of the Selection bar (3) of the "Master"
cooking zone it will be possible to set the operating
level (Power)
- to deactivate the Bridge Function simply repeat the
same activation procedure
Temperature Manager
Temperature Manager is a function that allows to set the
most suitable pre-set temperature to achieve the desired
result (see the Temperature Manager table at the end of
this chapter).
Select the desired cooking zone.
• Press once or multiple times
most suitable level among the ones available:
* See the Temperature Manager at the end of this
chapter.
• Press again to turn it off.
The following symbol appears on the display of the zone
working in Temperature Manager mode "
Key Lock
The Key Lock allows to block the settings of the hob to
prevent accidental tampering, leaving the functions that
have already been set active.
Activation:
• press
(9)
• The LED over the button will turn on, to indicate that it
has been activated
Repeat the operation to deactivate.
Child Lock
The Child Lock makes it possible to prevent children from
accidentally accessing the cooking zone and extraction
zone, preventing the activation of any functions.
(4) to choose the
Melting*
Warming*
"
The Child Lock can only be activated when the product is on,
but with the cooking zones (and extraction zone) off.
Activation:
• remove any pots from the hob
• simultaneously press and hold
an acoustic signal indicates that the function is active,and a
" " appears on display (13) and (14). Repeat the operation
to deactivate.
Timer
The Timer function is a countdown, which can be set for each
cooking zone (and extraction zone), even simultaneously.
Note: the timer is a simple warning buzzer, which at the end
of the set minutes DOES NOT turn off the cooking zone
Activation/Regulation of hob Timer function
• Select the cooking zone (power ¹ 0).
• Press
(8) to access the Timer function
• Regulate the duration of the Timer:
press the selector
time
press the selector
time
If desired, repeat the operation for the other cooking zones.
Note: Each cooking zone can have a different Timer set; on
the display, (15), the countdown of the last selected hob will
be shown for 10 seconds, after which the countdown with the
least remaining time will be shown.
When the timer has finished the countdown, there is an
acoustic signal (for 2 minutes, or it will stop when one of the
buttons on the hob is pressed), while the display (15) will
flash, with the symbol " .
Note: on the side of the display of the cooking zone, the
following symbol will appear
To switch off the Timer:
• select the cooking zone
• set the value of the timer to " " , by means of
Not: the function remains active if no other key is pressed in
the meantime.
Egg Timer
The Egg Timer function is a countdown independent of the
cooking zones (and the extraction zone). The Egg Timer is
activated by pressing
Note : to regulate the Egg Timer function, follow the same
procedure as for the Timer function.
When the timer has finished the countdown, there is an
acoustic signal (for 2 minutes, or it will stop when one of the
buttons on the hob is pressed), while the display (15) will
flash, with the symbol " .
18
(9) and
, to increase the automatic shut-down
, to decrease the automatic shut-down
".
(19)
(8) .
".
(10),
Publicité
