Elica ENS436BL Mode D'emploi page 14

1. Connect the 2 black wires together
using the UL listed wire connectors
2. Connect the 2 red wires together using
the UL listed wire connectors
3. Connect the 2 white wires together
using the UL listed wire connectors
4. Connect the green ( or yellow-green)
ground from the cooktop cable ti the green
(or yellow-green) ground wire (in the
junction box) using the UL listed wire
connectors
5. Install junction box cover.3-Wire Cable
from Home Power Supply to 4-Wire
Cable from Cooktop - U.S. Only
IMPORTANT: Use the 3-wir cable from
home power supply where local codes
permit connecting the frame-ground
conductor to the neutral (white) junction
box wire.
A. Cable from home power supply
B. Red wires
C. White wire and green (or yellow-green)
wire (from cooktop)
D. 4-wire cable from cooktop
E. Junction box
F. White wires
G. UL listed wire connector
H. Black wires
I. UL listed or CSA approved conduit
connector
1. Connect the 2 black wires together
using the UL listed wire connectors
2. Connect the 2 red wires together using
the UL listed wire connectors
3. Connect the green ( or yellow-green)
and white cooktop cable to the white (neutral)
wire in the junction box using the UL listed
wire connectors
4. Install junction box
cover.
Sequences installation - pag.76
14