Setting Up The Outdoor Sensor; Use Additional Wireless Sensors - ADE WS 1911 Mode D'emploi

Setting up the outdoor sensor

DANGER of severe injuries
The wireless outdoor sensor is equipped with a hanging
eyelet on the rear side.
− Place or hang the outdoor sensor at a position where
it is protected from the direct influence of the weather
(rain, sun, wind, etc.). Suitable locations are, for
example, under an awning or in a carport.

Use additional wireless sensors

The base station is supplied with a wireless sensor. However,
you can operate it with up to three outdoor sensors.
Please contact service@ade-germany.de for more
information or a paid order.
‚ The outdoor sensors can be situated in different
spaces or outdoors.
‚ Every sensor must be allocated its own number
(= no. of the transmission channel).
‚ The standard sensor included in the scope of delivery
always has channel number 1. This number is fixed
and cannot be changed.
68
− During wall installation, there must be
no electrical cables, gas or water pipes
installed in the walls at the mounting site.
Otherwise, when drilling holes, there is a
risk of electric shock!
WS 1911 weather station