Publicité
Les langues disponibles
Les langues disponibles
ENERGY mode
To enable this mode, first perform a weld without a load. Push the button
Push the button again to calibrate. Once the calibration has been done, the machine displays the last values used in this mode for current and energy.
The use can then modify the welding current, energy and resistance. The duration of the weld will vary based on the time required for the machine
to reach the energy level required. If it is taking too long, the machine will display the error message «maximum duration reached».
Push the button
for 2 seconds to return to the AUTO mode.
SETTINGS MENU
GLUE mode:
On the SETTINGS screen below, the user can specify the presence glue between the panels/sheets. When this mode is in use, a pre-spot is performed
before the weld. The duration of this pre-spot is set in milliseconds, from 0 to 400 ms, with 50 ms thresholds. When the glue mode is selected, la
word « GLUE » is displayed in the menus of the NORMAL, MANUAL, MULTI or GYSTEEL welding modes.
GYSPOT PTI PREMIUM PRO
The ENERGY mode is optional and can be set using the «Settings» menu.
This mode is used to control the energy transmitted during the weld. This mode is not designed to be used
during repairs but for the benefit of manufacturers and quality control organisations conducting tests.
This menu is accessible by pressing and holding the button
The language used in the menu can amended on line 1.
The date and the time can be programmed on line 2.
The modes GYSTEEL, MANUFACTURER , AUTO, ENERGY, NORMAL et MULTISHEETS can be activated or deacti-
vated using this menu.
Ce menu est accessible en pressant la touche
La langue des menus peut être sélectionnée en ligne 1.
La date et l'heure peuvent être programmées en ligne 2.
Les modes GYSTEEL, CONSTRUCTEUR, AUTO, ENERGY, NORMAL et MULTITOLES peuvent être activés / désac-
tivés dans ce menu.
daN control :
This setting allows you to activate or control the clamping force of the clamp during a weld.
(F
-9). The message «Do a spot without a load» is displayed on the screen.
for 2 seconds.
pendant plus de 2 secondes.
EN
41
Publicité
