GYS POT PTI PREMIUM PRO 400 V Mode D'emploi page 36

L1 : Phase 1
L2 : Phase 2
• The device turns into protection mode if the power supply tension is below or above the 15%. To indicate this default, the screen displays an error
code.
• In order to ensure optimal functioning of the equipment, check that the compressed air circuit can supply 8 bar (116 Psi) and then connect the air
supply to the back of the machine. The machine must not be used on an air network with a pressure under 4 bar (58 Psi) or over 10 bar (145 Psi).
CONNECTION TO A GENERATOR
The equipment is not protected against the regular overvoltage waves emitted by the power generator. It is therefore not recommended to connect
them on this type of power supply.
ACCESSORIES AND OPTIONS
Coolant
5 l : 062511
10 l : 052246
Caps sharpener
048966
100
180
96
G1 (550 daN) - ref. 022768 INCLUDED
G2 + G3 + G4 - ref. 022898
36
GYSPOT PTI PREMIUM PRO
Power supply cable
L1
L2
L3
L3 : Phase 3
: Earth (Green/Yellow or green)
40 caps
x 18
x 10
048935
Pressure sensor Welding test case
052314
Plug 400 V / 3 phases + earth
Protective cover
x 18 x 6
050068 050853
Europax anti-corrosion
050433 052758
100
93
G2 (300 daN) - ref. 022775
100
117
44
G6 (550 daN) - ref. 022812
L1 L2
L3
Neutral (not used)
SD card including Overhanging balancing
automatic programs
050914
Gun kit
067318
180
205
154
96
G3 (550 daN) - ref. 022782
40
G7 (150 daN) - ref. 022829
EN
system 10>14 kg
059696
155