Publicité
General
We appreciate your choice of a new product from R82 - a worldwide supplier of technical aids and ap-
pliances for children and teenagers with special needs. To fully benefit from the options offered by this
product please read this User Guide before use and save it for future reference.
Intended purpose
Assistive device for toileting, washing, bathing
and showering for children and adults with
disabilities.
Indications
The device can be used by children and
adults with disabilities, who lack the ability
to maintain a seated position without an
assistive device or to compensate for the lack
of ability to maintain a standing position while
washing oneself or showering. The target
group for the device is based on functional
ability. It is not based on a specific health
condition or age.
The user is the person sitting in the device.
The caregiver is the person operating the
device. Never leave the user unattended in
this device. Ensure permanent supervision by
a caregiver.
The device can be applied more times during
the day. Between using the device, the user
will be lying down, standing or sitting in
another assistive device or a conventional
product.
Contra indications
There are no known contra indications.
Precautions
Special attention should be given to the
considerations about the configuration of the
device and the use of accessories for users
with limitation in their:
• Sensory functions and the sensation of
pain consider extra checks of the pressure
caused by the support provided by the
device and its accessories.
• Ability to maintain a seated position, use
the device with accessories (e.g. vests,
belts, or a tray).
• Ability to maintain the position of their
head, consider using accessories that
provide support to the positioning of the
head.
Application areas
• The product is for indoor use
• This equipment is for use in home care
environment.
Enclosed tools
• 6 mm Allen key
Declaration of Conformity
This product conforms to the requirements of
EN
ENGLISH
the Medical Devices Regulation (2017/745).
Further, this product conforms to the
requirements according to:
• EN 12182
• ISO 17966
The CE mark must be removed when:
• Rebuilding the product
• Using the product outside the intended
purpose and declaration of conformity
• Using other than original R82 spare parts
and fittings
When combining the device with other
products, the combination must not change
the intended purpose of the products or
modify the products in such a way that
compliance with the applicable requirements
may be affected. The person / company
responsible for the combination of the
products must ensure that the applicable
requirements are fulfilled.
Applicable requirements examples:
• Material safety (biocompatibility,
flammability), mechanical safety (stability,
squeezing hazards, inter connection),
electrical safety
Disposal
When a product reaches the end of its lifetime,
it should be separated by material type so
that the parts can be recycled or disposed
of properly. If required, please contact your
local dealer for a precise description of each
material. Please contact your local authorities
to be informed of the options available for
recycling in an environmentally-friendly way.
Accessories and spare parts
The products from R82 can be supplied with
a variety of accessories including vests and
belts which comply with the needs of the
individual user. Spare parts can be ordered on
request. Find the specific accessories on our
website or contact your local dealer for further
information.
R82 Warranty
www.etac.com/support
Presales information and
instructions
Presales information and instructions are
available at www.etac.com, under your
product, in the documents section.
28
etac.com
Publicité
