Vertical Use - geo-FENNEL FL 240HV Mode D'emploi

EN
HORIZONTAL USE
Set up the instrument on an even surface or mount it onto a tripod.

VERTICAL USE

Set up the instrument vertically (on the side with the vertical 5/8" hole) or mount it onto a tripod with its
vertical 5/8" thread.
After switching on the unit a flashing laser diode indicates that the automatic self-levelling procedure is
working. The laser starts rotating when self-levelled. If not the laser was set up outside of its self-
levelling range. In this case set up the instrument on a more even surface.
D
KEYPAD AND OPERATION
18
15
14
13
12
11
10
9
8
16
1
2
7
3
4
5
6