Installation Of Battery; Charging The Battery - geo-FENNEL FL 240HV Mode D'emploi

EN
C

INSTALLATION OF BATTERY

Both the standard NiMH battery pack and 4* C alkaline batteries can be used.
1) Insert 4*C alkaline batteries into the alkaline battery box (ensure correct polarity) and fix the battery
box into the instrument.
OR
2) Fix the rechargeable battery box into the instrument.
1) 2)

CHARGING THE BATTERY

Connect the charger with the charging plug of the instrument and power source. If the charging LED is
red the battery is being charged; if LED is green the battery is fully charged.
ATTENTION
The rechargeable battery can be charged if it is in the instrument or if it is ouside.
Battery status indication: If the ON/OFF LED flashes the battery has to be recharged.
Charging LED
17