Vertical Use - geo-FENNEL FLG 245HV-GREEN TRACKING Mode D'emploi

EN
HORIZONTAL USE
Set up the instrument on an even surface or mount it onto a tripod.

VERTICAL USE

Fix the laser on its vertical support, unfold the datum point of the integrated vertical mount and set up
the laser in its vertical position or mount the laser onto a tripod with its vertical 5/8" thread.
After switching on the unit a flashing laser diode indicates that the automatic self-levelling procedure is
working. The laser starts rotating when self-levelled. If not the laser was set up outside of its self-
levelling range. In this case set up the instrument on a more even surface.
28