Intended Use Of Instrument; Safety Instructions; Laser Classification - geo-FENNEL 360 LinerPoint HP Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

INTENDED USE OF INSTRUMENT

The instrument emits a visible laser beam in order to carry out the following measuring tasks (depending on instru-
ment): Setting up heights, horizontal and vertical planes, right angles.

SAFETY INSTRUCTIONS

·
Follow up instructions given in user manual.
·
Do not stare into beam. Laser beam can lead to eye injury. A direct look into the beam (even from greater distance)
can cause damage to your eyes.
·
Do not aim laser beam at persons or animals.
·
The laser plane should be set up above eye level of persons.
·
Use instrument for measuring jobs only.
·
Do not open instrument housing. Repairs should be carried out by authorized workshops only. Please contact your
local dealer.
·
Do not remove warning labels or safety instructions.
·
Keep instrument away from children.
·
Do not use instrument in explosive environment.
·
The user manual must always be kept with the instrument.

LASER CLASSIFICATION

The instrument is a laser class 2 laser product according to DIN IEC 60825-1:2008-05.
It is allowed to use unit without further safety precautions.
Eye protection is normally secured by aversion responses and the blink reflex.
The laser instrument is marked with class 2 warning labels.
Please note:
If you return instruments for repair / for adjustment to us please disconnect batteries or rechargeable batteries
from the instrument - this is for safety reasons!
Thank you.
EN
13

Publicité

Table des Matières
loading

Table des Matières