Installation Of Batteries - geo-FENNEL FL 110HA Mode D'emploi

ACCURACY COARSE / NORMAL / FINE
The FR 45 is equipped with three precision modes. It can be chosen with button (9):
Accuracy coarse ± 10 mm
Symbol on display: without symbol
Accuracy normal ± 4 mm
Symbol on display:
Accuracy fine ± 2 mm
Symbol on display:

INSTALLATION OF BATTERIES

• Open the battery compartment cover (7).
• Put in 1 x 9 V AA battery according to the installation symbol (ensure correct polarity!). Close the
cover.
• In order to save battery power the receiver will automatically turn off if it has not received a laser
scanning signal for 5 minutes.
USE OF THE RECEIVER
Press the button (5) to switch the unit on.
Move the receiver up and down carefully to detect the laser beam.
A Move the receiver down
Acoustic signal : ultra-short frequent beep
B Move the receiver up
Acoustic signal: short frequent beep
C On level
Acoustic signal: continuous beep
A+B: The closer the distance to „on level" (C) is,
the shorter the arrows become.
CLAMP FOR LEVELLING STAFF
If required FR 45 can be attached to laser poles or any other equipment by means of the clamp sup-
plied with.
EN
21