Overview; Handlebar - Stihl MH 610 Notice D'emploi

3 Overview

3 Overview
3.1 Tiller
1 Throttle lever
The throttle lever is used to adjust the engine
speed.

2 Handlebar

The handlebar is used to hold, guide and
transport the tiller.
3 Clutch lever for lateral adjustment
The clutch lever for lateral adjustment is used
to adjust the handlebar laterally.
4 Transport handle
The transport handle is used to carry the tiller.
5 Engine oil cap
The engine oil cap seals the opening for add‐
ing engine oil.
6 Front wheel
The front wheel is used to transport the tiller.
7 Gearbox housing
The gearbox housing covers the gearbox.
0478-404-9902-B
8 Guard
The guard protects the user from high-veloc‐
ity objects and from contact with the hoes.
9 Hoe
The hoe tills the ground.
10 Blade spur
The blade spur is used to regulate the work‐
ing speed and working depth.
11 Gear lever
The gear lever is used to set the gears.
12 Clutch lever
The clutch lever engages and disengages the
drive shaft.
13 Handle
The handles are used to operate, hold and
guide the tiller.
14 Main switch
The main switch is used to start and stop the
engine.
15 Lever
The lever is used to set the handlebar height.
16 Fuel tank cap
The fuel tank cap seals the opening for add‐
ing petrol.
17 Spark plug
The spark plug ignites the fuel in the engine.
18 Spark plug socket
The spark plug socket connects the ignition
lead to the spark plug.
19 Blade spur mounting
The blade spur mounting consists of a pin
and retaining pin and secures the blade spur.
20 Gearbox oil cap
The gearbox oil cap seals the opening for
adding gearbox oil.
21 Screw plug
The screw plug seals the opening for draining
the gearbox oil.
22 Folding retainer
The folding retainer secures the hoe.
23 Starter handle
The starter handle is used to start the engine.
24 Oil bath air filter
The oil bath air filter filters the air taken in by
the engine.
25 Running wheel
The running wheels are used to transport the
tiller.
# Rating plate with machine number
English
3