Finger Guard; Laundry Rod - Miele professional PM 1210 Mode D'emploi

Finger guard

The finger guard is a safety device that
must be checked daily for proper function
every time the ironer is turned on.
Activate the finger guard once while the
"Finger guard" symbol is flashing.
If finger tips get between the roller and the
finger guard, the roller is stopped immedi‐
ately and the heater plate is withdrawn.
When this happens, the "Finger guard" dis‐
play symbol will light constantly. During the
reverse mode of the roller, the finger guard
has no function. The ironer can be turned on
again by pressing the  button.
Do not use the finger guard intentionally to
turn off the machine.

Laundry rod

(only for PM 1210)
Ironed laundry can be placed over the swing
out bar to prevent creasing.
en-CA - Guide to the machine
11