Sub-Zero PRO3650 Guide D'utilisation Et D'entretien page 9

Storage
Refrigerator Storage
PULL-OUT SHELF
The bottom shelf pulls out for easy access to condiments
and other items commonly stored on door shelves. Adjust-
able rails keep items snugly in place. To adjust, pull the rail
up and rotate. Refer to the illustration below.
CRISPER LID
To remove the crisper lid assembly, pull the upper refrig-
erator drawer all the way out, raise the front edge of the
crisper lid up, and pull out from the back. Refer to the
illustration below.
DRAWER DIVIDERS
Long dividers run the full depth of the drawer, with shorter
dividers that connect to the long dividers to compartmen-
talize the drawer.
To remove the short dividers, lift up and out. The long
dividers cannot be removed.
Pull-out shelf Crisper lid (48" model shown)
Freezer Storage
STAINLESS STEEL SHELVES (48" MODELS)
To remove or adjust a shelf, tilt up, then lift up and out. To
install, insert the shelf in the tracks along the back wall,
then lower the front until it locks into position.
ICE CONTAINER
To remove the ice container, pull the drawer out to full-
extension, then lift the container up and out.
subzero.com | 9