Hürner WeldControl EF 315 Manuel Utilisateur page 33

H Ü R N E R S c h w e i s s t e c h n i k G m b H
Nieder-Ohmener Str. 26
35325 Mücke, Germany
1 Introduction
Dear Customer:
Thank you very much for purchasing our product. We are confident
that it will bring you success and meet your expectations.
The development, manufacture, and check of the integrated combo
welding system HÜRNER WeldControl EF 315 has been per-
formed with a view to superior operation safety and user-friendliness.
The system was manufactured and checked according to state-of-the-
art technology and widely recognized safety provisions.
To ensure maximum operation safety, please conform to the appro-
priate messages in this booklet and the rules for the prevention of
accidents.
Thank you.
2 Safety Messages
This User's Manual contains important instructions for the intended
and safe operation of the product. Every person who operates the
product has to conform to the instructions of this manual.
2.1 Reading the User's Manual
The User's Manual is presented according to sections which explain
the different functions of the product. Unmarked paragraphs or sec-
tions are valid for both welding modes that the product allows (see
Sect. 2.5 and 3.5).
Paragraphs or sections marked by the symbol to the
right apply to the jointing mode of welding with
eletrofusion fitting only.
Paragraphs or sections marked by the symbol to the
right apply to the jointing mode of butt welding
with heating element only.
All rights, in particular the right to copy or reproduce (in print or
electronic form) and distribute as well as to translate, are reserved
and subject to prior written consent.
2.2 Explaining Icons
The following expressions and icons are used in this User's Manual to
refer to safety-related issues:
This icon indicates that non-compliance may result in a haz-
ardous situation that possibly causes bodily injury or material
damage.
Caution
This icon indicates important messages related to the correct
use of the product. Non-compliance may cause problems of
operation and damage to the product.
Important
This icon indicates tips and useful information for using the
product more efficiently and more economically.
Info
Version January 2018 HÜRNER WeldControl EF 315 User's Manual
5
EN