Sony HANDYCAM DCR-IP1E Mode D'emploi page 70

INFO DISP
BEEP
DISPLAY
MENU ROTATE
70
Using the Menu
INFO DISP ID 00002
GRADUATION
01 01 2004 10:00
15 01 2004 15:00
RECORDED AREA
GON
Select to display the cassette information for about 5 seconds:
– After the POWER switch is set to the CAMERA-TAPE
mode and the cassette is inserted.
– When the POWER switch is set to the PLAY/EDIT mode.
OFF
Select when you do not want to display the cassette information.
GMELODY
Select to sound a melody when you start/stop recording, when
executing any operation on the touch panel or when an unusual
condition occurs on your camcorder.
NORMAL Select to sound a beep instead of the melody.
OFF
Select to cancel the melody, the beep sound, the shutter sound or the
confirmation beep sound for operation on the touch panel.
GLCD PANEL Select to show the displays such as the tape counter on the LCD
screen.
V-OUT/PANEL Select to show the displays such as the tape counter on the TV screen
and the LCD screen.
Note
b
• You cannot input a signal to your camcorder if you press DISPLAY/BATT INFO while
[V-OUT/PANEL] is selected.
You can select the scrolling direction (up and down) of the menu items on the
LCD screen when you touch
GNORMAL
Select to scroll the menu items downwards by touching
OPPOSITE
Select to scroll the menu items upwards by touching
The unique number of each cassette. Your camcorder
automatically assign this number. You can not change this
number.
The cassette title set by [
(Cassette label).
The first-recorded date in this cassette.
The last-recorded date in this cassette.
The recorded area is indicated by the yellow-green bar.
or on the screen.
TAPE TITLE] in the menu settings
.
.