Franke MYTHOS FMY 839 HE Manuel D'utilisation page 8

EN
adhesives may result in
warping and detachment.
The kitchen unit must have
Z
sufficient space to allow
for electrical connection of
the device. Wall-mounted
units above the device must
be installed at a sufficient
distance to leave the space
required to work in comfort.
The use of decorative
Z
hardwood borders around
the worktop behind the
device is allowed, provided
the minimum distance
always complies with the
indications provided in the
installation drawings.
The minimum distance
Z
between the fitted device
and the rear wall is indicated
in the installation drawing for
the flush-fitted device (150
mm for the side wall, 40 mm
for the rear wall and 500
mm for any wall-mounted
units above it).
To avoid any infiltration of
Z
liquids between the hob
frame and the worktop,
position the adhesive seal
FMY 839 HE
provided along the whole
outer edge of the hob before
installation.
Proper use
The suction hood has been
Z
designed solely to eliminate
cooking fumes during
domestic use.
Never use the appliance
Z
for purposes other than
those for which it has been
designed.
Deep-fryers must be kept
Z
under constant supervision
when in use: the oil may
catch fire if it gets too hot.
Do not use the device with
Z
an external timer or separate
remote controlled system.
The device must never be
Z
installed behind a decorative
door, to prevent it from
overheating.
Never climb onto the device,
Z
as this may damage it.
Never place hot pots and
Z
pans on the frame, as this
may damage the silicon seal.
Never cut or prepare food
Z
on the vitreous ceramic
– 8 –