EN
Display elements and buttons for extractor fan control panel
Extractor fan selection
Increase / Decrease extraction speed (power)
Activation / Deactivation of automatic function (by default automatic mode is active).
When the selection bar of the cooker hood is touched (pressed), the automatic mode
deactivates and works with the extractor fan in manual mode.
To re - activate the automatic mode press button
indicate that the hood is working in this mode.
By default the hood is in ducted mode.
Activate charcoal filter
–
Press for 5 sec the button
Since that time lit icon will show when it is necessary to perform maintenance of the
charcoal (odour) filter
.
The grease cleaning filter notification through led
Resetting activated carbon odour filter saturation
After performing maintenance on the filters:
–
Press and hold 5 sec the button
The grease led will turn off, and the indicator countdown will start again.
–
Press and hold 5 sec the button
The odour led will turn off, and the indicator countdown will start again.
Set the speed INTENSIVE 1
This speed is timed to run for 10 min. At the end of this time, the system returns
automatically to the speed that was set before.
Set the speed INTENSIVE 2
This speed is timed to run for 5 min. At the end of this time, the system returns
automatically to the speed that was set before.
FMY 839 HE
on the hood the first time that it is switched on
– 12 –
and the led
will light up to
is always enabled.
.