MS Schippers 4309606 Mode D'emploi page 38

Baud
Pr
Ptype
L ab
Prt
L ang
Deci
P3 cal
Dual
Cal
Count
gra
38
To set the baud rate.
Options:
600 / 1200 / 2400 / 4800 / 9600
To set the parity
Options:
7 e1 / 7 o1 / 8 n1
To set printer model
Options:
Tpu p : set the Tscale printer tpup
Lp50 : Set the Tscale printer LP-50
To set the print format for gross weight /
accumulation options
Options:
lab 0 / lab 1 / lab 2 / lab 3
To set the print format for date / time options.
Options:
Prt 0 / prt 1 / prt 2 / prt 3 / prt 4 / prt 5 / prt 6 / prt
7
To set language.
Options:
Eng for English
To set to use decimal
Options;
0 / 0.0 / 0.00 / 0.000
Off R1 inc
(preference) To select the scale division.
Options:
1 / 2 / 5 / 10 / 20 / 50 / 100 / 200
R1 cap
To set the scale capacity
On R1 inc
To select the scale division.
Options:
1 / 2 / 5 / 10 / 20 / 50 / 100 / 200
R1 cap
To set the scale capacity.
Then press
Nonlin To set non linear calibration
Linear To set linear calibration
Showing scale internal counts
To set local gravity
to set R2inc and R2 cap