User Settings; Switch Backlight On/Off; Setting Auto Power Off; Calibration - MS Schippers 4309606 Mode D'emploi

10. User settings

10.1 Switch backlight on/off

Hold the key in for 3 seconds, display shows "setbl". Press
press key to choose an option (BL ON: always on, BL AU: auto backlight, now the backlight
comes on as soon as a key is pressed or a weight is placed on the scale, BLOFF: backlight always
off), press to confirm, press

10.2 Setting Auto Power Off

Hold the key in for 3 seconds, display shows "setbl". Press
Press key to enter your selection, press
(ON: always ON, 5: switch off auto after 5 mins. without operation, or 15: auto-switch off after
15 minutes without operation), press

11. Calibration

To set calibration, turn on the scale.
Press key during the self checking.
Display will show "pn".
Press , and
Press until display shows "p3 cal".
Press key to confirm and then press
Press key to confirm, display will show "nonlin".

11.1 Normal calibration nonlin

Press key to enter calibration, display will be show "unld".
Remove all weight from the platform.
When indicator shows "Stable", press
Display will show the last calibration weight. To change the calibration weight value, press
and keys to change the active digits and press
When the calibration value is correct, press
Display will show "load".
Place the calibration weight on the platform.
30
to escape.
key to choose the auto power off time
key to confirm, press
to enter, display will show "po chk".
to select "cal".
key to confirm.
key to confirm.
key to enter backlight,
key, display shows "setoff".
key to go back.
key to increment the value.