Secondary Functions Of The Keys; Basic Operation; Resetting The Display - MS Schippers 4309606 Mode D'emploi

Secondary functions of the keys

Function
To confirm the selected menu
To change the menu and active digit
To move the active digit to right
To move the active digit to left
To enter into the menu
Escape from the menu to normal operation
Press and keys at the same time during normal weighing to switch "Animal weighing"
on or off. When the weight stabilises in "Animal weighing mode", a beep sounds twice.
Hold the key down to activate parts counting.
Press and to clear the memory.

3. Basic operation

3.1 Resetting the display

The indicator can be reset at any time by pressing the
to continue weighing or counting, within the pre-set limit. This is usually necessary only when the
platform is empty. When zero is reached, the display shows 0.
The weigher has an automatic reset, for example when a very small plus or minus weight difference
occurs. However, it may be necessary to reset manually by pressing the
displayed while the platform is empty.
24
Key
key at the point from which you wish
key if a low weight is