Accumulation Operation; Memory Recall; Memory Clear; Automatic Accumulation - MS Schippers 4309606 Mode D'emploi

5.2 Accumulation Operation

Place the load on the platform.
Press the key when the weight displayed is STABLE.
Display will show "ACC 1", then the total saved value will appear. These displays will be shown for
only three seconds.
Remove the weight from the pan.
When the display returns to zero and stabilises, place the second weight on the scale.
Continue until all weights have been added or the memory is full (99 items).

5.3 Memory Recall

To recall the memory, press the key.

5.4. Memory Clear

To clear the memory, press the and keys together.

5.5 Automatic accumulation

During self checking, press the PRINT key. Go to enter mode. Press TARE key until P2COM
appears on the display, press key to enter, press key to select the mode, press
to confirm. Display shows current RS-232 status, press TARE key and select AUTO. Once AUTO
has been set, the AUTO indicator appears.
Place a weight on the platform. If it is stable, a beep sounds twice. Weight can now be added or
removed. When the weight stabilises, the beep sounds again. Finally, remove all weight from the
scale. The last stable weight is now stored.

6. Parts Counting

To enter parts counting mode, press and hold the key. Display will show "P 10".
Press to change the parts quantity.
Options: p 10 / p 20 / p 50 / p 100 / p 200

6.1 Parts Counting Operation

Select the parts quantity as per the option.
Place the load on the platform.
Press key to confirm, display will shown "----" followed by the quantity.
Goods can then be added to the platform. The display will update the parts quantity automatically.
27