Inserting The Water Filter - Melitta PASSIONE Mode D'emploi

Care and maintenance
Fig. 18: Screwing/Unscrewing the water filter
The water filter (33) is screwed in and unscrewed from the thread (34) on
the base of the water tank (1) using the screwing aid (32).
Information
The water filter should not be left standing dry for a long period of time.
When it is not used for a long time, we recommend storing the water filter
in a vessel filled with tap water in the refrigerator.

Inserting the water filter

Information
ū The water hardness cannot be set if you use a water filter. The water
hardness is automatically set to soft (see section 6.4 Setting the water
hardness on page 78).
ū Place the water filter into a vessel filled with fresh tap water for a few
minutes before inserting it.
92
32
33
1
34