Using Milk; Emptying The Drip Tray And Coffee Grounds Container - Melitta PASSIONE Mode D'emploi

1. Connect the Cappuccinatore to the steam pipe (12). Slide the connec-
tion of the Cappuccinatore to the stop (27) of the steam pipe.
2. Connect the milk hose (22) to the Cappuccinatore.
3. If you do not want to use milk, clamp the milk hose in the holder (20).
4.7

Using milk

Use cooled milk for optimum coffee enjoyment.
Fig. 10: Commercial milk pack
1. Remove the milk hose (22) from the holder (20).
2. Insert the milk hose into a conventional milk pack (28) or into a vessel
filled with milk.
4.8

Emptying the drip tray and coffee grounds container

After several beverage dispensing processes, the drip tray (6) and the coffee
grounds container (5) can become full and must be emptied. The projecting
float (15) indicates the current filling level of the drip tray.
After a specified number of beverage have been dispensed, the appliance
also shows that the drip tray and coffee grounds container are full. Always
empty the drip tray and coffee grounds container.
Basic operation
22
28
69