Maruyama MCV5100 Manuel D'instructions page 17

- Chain saw components.....................19
- Symbol interpretation.........................20
- Chain saw specifications. .................20
- Safety precautions..............................21
- General directions..............................22
- Work clothes and accessories..........22
- Chain saw transport............................22
- Start-up.......................................... ......22
- Danger warning kickback..................23
- Cutting techniques..............................23
- Maintenance and repairs...................25
- Bar and chain - installation.......... .....25
- Mix and chain oil fueling............... .....25
IN NORMAL CONDITIONS OF USE, THIS MACHINE MAY INVOLVE A DAILY LEVEL OF PER-
SONAL EXPOSURE TO NOISE FOR THE OPERATOR EQUAL TO OR GREATER THAN
DECLARATION OF CONFORMITY TO MACHINES DIRECTIVE
MANUFACTURER
DECLARES THAT THE DISIGN OF THE CHAIN SAW DESCRIBED BELOW:
Model :
Serial nunber :
Make :
CONFORMS TO THE REQUIREMENTS OF THE DIRECTIVE 2006/42/EEC, 2014/30/CE, 2000/14/
CE,1997/68/CE AND TO THE NATIONAL REGULATIONS GOVERNING ITS TRANSPOSITION ABROAD.
"CE" CERTIFICATES, NO. MOD. MCV5100 = M.0303.18.6012
BY THE I.C.E. (Notified certification body n°0303)
PALAZZO DEL VESCOVO - V. GARIBALDI, 20 - 40011 ANZOLA DELL'EMILIA - ITALY
Signed in 23.03.2018 a San Giovanni in Croce, Italy
________________
Alberto Griffini
President
INDEX
WARNING!!!
RISK OF DAMAGING HEARING
85 dB(A)
ACTIVE s.r.l.
via Delmoncello,12
26037 - San Giovanni in Croce (CR)
ITALY
MCV5100
E51180001 and up
MARUYAMA
- Engine - starting.......................... ..26
- Carburetor - adjustments............ ..27
- Chain brake................................. ..27
- Starter system............................. ..28
- Ignition system............................. ..28
- Clutch - assembly........................ ..28
- Drive pinion....................................28
- Oil pump...................................... ..29
- Oil filter......................................... ..29
- Engine - maintenance................ ..29
- Bar - maintenance...................... ..29
- Chain - maintenance.................. ..29
- Storage........................................ ..30
ENGLISH GB
17