Publicité
FUSE INSPECTION (TT-R125E/TT-R125LWE)
1
2
1
6. Install:
7. Check:
8. Lubricate:
9. Connect:
CAUTION:
First, connect the positive lead 1, then the
negative lead 2.
10. Install:
FUSE INSPECTION
(TT-R125E/TT-R125LWE)
CAUTION:
To avoid a short circuit, always set the
main switch to "OFF" when checking or
replacing a fuse.
1. Remove:
2. Check:
Checking steps:
Remove the fuse 1.
G
Connect the pocket tester to the fuse and
G
check the continuity.
NOTE:
Set the pocket tester selector to "Ω × 1".
2
If the pocket tester indicates "∞", replace
G
the fuse.
2 Reserve fuse
3 - 41
Battery
G
Battery terminals
G
Dirt → Clean with a wire brush.
Loose connection → Connect properly.
Battery terminal
G
Recommended lubricant:
Lithium soap base grease
Battery leads
G
(to the battery terminals)
Battery cover
G
Battery cover
G
Continuity
G
Pocket tester:
YU-03112-C/90890-03112
INSP
ADJ
Publicité
