Publicité
‰ Fasten the clutch cable with the
paint in the cable guide bottom
recess.
Ï Pass the throttle cable and
starter cable through the cable
guide.
Ì Fasten the starter motor lead.
Ó Pass the engine oil breather
Pass the overflow hose
hose
and
overflow
between the right half of the
between the right half of the
swingarm and frame.
swingarm and frame.
È Pass the negative battery lead
on the inside of the frame as
shown.
Ô Fasten the engine oil breather
Fasten the overflow hose and
hose, overflow hose and air
air vent hoses to 2 clicks.
vent hoses to 2 clicks.
K
After fastening the starter
After fastening the starter cable,
cable, push it against the
push it against the starter
starter plunger.
hose
plunger.
L
Put the tip of the air vent hose
Ò Put the tip of the air vent hose
into the frame.
into the frame.
2 - 34
SPEC
˜ Install the primary coil terminal
(orange) to the ignition coil.
ˆ Fasten the ground lead together
with the ignition coil.
Publicité
