Publicité
REAR SHOCK ABSORBER REBOUND DAMPING FORCE
b
ADJUSTMENT (TT-R125LWE)
a
1
3 - 25
5. Tighten:
Locknut
42 Nm (4.2 m · kg, 30 ft · lb)
G
6. Install:
Left side cover
G
7 Nm (0.7 m · kg, 5.1 ft · lb)
EC36N014
REAR SHOCK ABSORBER REBOUND
DAMPING FORCE ADJUSTMENT
(TT-R125LWE)
1. Adjust:
Rebound damping force
G
By turning the adjuster 1.
Stiffer a → Increase the rebound damp-
ing force. (Turn the adjuster
1 in.)
Softer b → Decrease
damping force. (Turn the
adjuster 1 out.)
Extent of adjustment:
Maximum
Fully turned in
position
STANDARD POSITION:
G
This is the position which is back by the spe-
cific number of clicks from the fully turned-in
position.
Standard position:
About 12 clicks out
CAUTION:
Never go beyond the maximum or mini-
mum adjustment positions.
INSP
ADJ
the
rebound
Minimum
20 clicks out
(from maximum
position)
Publicité
