Layout And Items Supplied; On/Off Switch; Important; Intended Use - FLORABEST FBS 43 A1 Instructions D'utilisation Et Consignes De Sécurité

Débroussailleuse thermique
Masquer les pouces Voir aussi pour FBS 43 A1:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3. Layout and items supplied

3.1 Layout (Fig. 1-13)
1. Connecting piece for long handle
2. Long handle
3. Steady grip
4. Starter line / starter cable
5. Choke lever
6. Petrol tank
7. Fuel pump „primer"
8. Air fi lter housing cover

9. On/Off switch

10. Throttle lever lock
1 1. Throttle lever
12. Throttle lock
13. Line spool with cutting line
14. Cutting line guard hood
15. Cutting blade guard hood
16. Screw M5 (4x)
17. Carrying strap
18a. Cutting blade (4 teeth)
18b. Cutting blade (3 teeth)
19. Holder for steady grip
20. Handle screw M8
21. Washer Ø 8mm
22. Carrier plate
23. Pressure plate
24. Pressure plate cover
25. Nut M10 (left-hand thread)
26. Oil/petrol mixing bottle
27. Spark plug wrench
28. Open-ended wrench 8/10 mm
29. Hex wrench 4 mm
30. Hex wrench 5 mm
31. Protective cap for spark boot plug
32. Handle screw M6
33. Nut M6
34. Washer Ø 6mm
35. Air fi lter
36. Spark boot plug
The cutting blade (18a/18b) and the line spool
(13) are jontly referred to in the text as the cutting
tool (generic term).
Anleitung_3401991_LB2.indb 61
Anleitung_3401991_LB2.indb 61
GB
3.2 Items supplied
Open the packaging and take out the equip-
ment with care.
Remove the packaging material and any
packaging and/or transportation braces (if
available).
Check to see if all items are supplied.
Inspect the equipment and accessories for
transport damage.
If possible, please keep the packaging until
the end of the guarantee period.

Important!

The equipment and packaging material
are not toys. Do not let children play with
plastic bags, foils or small parts. There is
a danger of swallowing or suffocating!

4. Intended use

The equipment (cutting blade mode) is designed
for cutting high grass and sparse scrub with the
4-tooth blade and for cutting dense scrub and
slender wood growth with the 3-tooth blade.
The equipment (line spool mode) is designed for
cutting lawns and small weeds. The operating
instructions as supplied by the manufacturer must
be obeyed to ensure that the equipment is used
properly.
Any use which is not expressly permitted in these
instructions may result in damage to the equip-
ment and place the user in serious danger. Be
sure to observe the restrictions in the safety infor-
mation.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
equipment is used in commercial, trade or indust-
rial businesses or for equivalent purposes.
Caution! Due to the high risk of physical injury to
the user, the equipment must not be used to carry
out the following work: to clean dirt and debris off
walkways, or to chop up tree or hedge clippings.
Similarly, the equipment must not be used to level
out high areas such as molehills. For safety rea-
- 61 -
04.12.12 15:30
04.12.12 15:30

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

87780

Table des Matières