STEP 6:
•
Fasten the handlebar (4) to the upper part of the frame (1) with 4 hex screws
(M6 x 12 mm) (10), 4 spring washers (11), 2 washers (17), and 2 curved wash-
ers (19).
Make sure that the computer cable feeds through the slot on the back of the frame
and connect the upper end of the cable.
02-SP-HT-1004-GB_NEUEST.indd 40
02-SP-HT-1004-GB_NEUEST.indd 40
40
07.06.23 11:43
07.06.23 11:43