Publicité
Les langues disponibles
Les langues disponibles
GB
3.2
How to set threaded mandrel length "X"
•
Detach locknut A, using double open-end spanner.
•
Adjust threaded mandrel length "X", according to nut length (see image 4) by turning
nosepiece B.
•
Make full use of depth of thread for closed blind rivet nuts (image 4).
•
Secure nosepiece B using locknut A
The setting stroke of the blind rivet nut setting tool is not affected by adjusting the mandrel
length.
4.
How to adjust the setting stroke or setting force
The blind rivet nut setting tool may either be operated using a firmly adjusted setting stroke or
by using a setting force that is adjusted to the respective nut size.
CAUTION! Please note!
When should you use a firmly adjusted setting stroke?
If the same blind rivet nut size and length are always set into the same material thickness, it is
possible to apply a constant setting stroke.
When should you use a setting force that is adjusted to the respective nut size?
•
When a blind rivet nut size (e.g. M6) is set into materials of varying thicknesses.
•
A blind rivet nut size of varying lengths (e.g. M6x15.5 or M6x18) is set into materials of
varying thicknesses.
This setting should be used as a priority.
22
Publicité
