Gesipa FireFox Mode D'emploi page 20

GB
• When depositing the blind rivet nut setting tool, make sure that it cannot fall.
• Repair work must be carried out by skilled personnel. Use genuine parts for repair at all times.
In case of doubt, always send the complete blind rivet nut setting tool back to the supplier or to
GESIPA .
®
• Avoid excessive contact with hydraulic oil. If irritation of the skin occurs, wash affected skin
parts thoroughly with water!
• Dispose of hydraulic waste oil according to current regulations.
2.3 Work capacity
FireFox 1
®
The blind rivet nut setting tool is designed for setting blind rivet nuts and blind rivet nut studs M3
to M6 made of any kind of material except for M6 stainless steel.
FireFox 2
®
The blind rivet nut setting tool is designed for setting blind rivet nuts and blind rivet bolts M3 to
M10 made of any kind of material, as well as M12 in aluminium and steel.
2.4 Technical data
Weight
Working pressure
Gun stroke
Hose connection
Compressed air
consumption
Setting force at 6 bar
Hydraulic oil
Noise emission L
pa
Vibration
Compressed air
quality
20
FireFox
2,2 kg
max. 7,5 mm
c. 1 - 2 litre/setting process (dependent
on nut size)
12 kN
75 dB, Measurement uncertainty K=3dBB
< 2.5 m/s², Measurement uncertainty K=1.5 m/s²
Filtered (Lubricated or non-lubricated; lubricated air
increases the service life of the pneumatic motor)
1
®
5-7 bar
Ø 6 mm (1/4")
c. 2-4 litre/setting process (depend-
ca. 30 ml (ISO VG 32 to 46)
FireFox 2
®
2,4 kg
max. 10 mm
ent on nut size)
22 kN