Initial Operation - Masterflex Digi-Staltic 77310-00 Notice D'utilisation

INITIAL OPERATION

When power is first applied from any of the attached pumps, the control console displays the welcome screen:
After three seconds, the Program Menu appears:
The number displayed in the upper right corner represents the pump number currently being controlled. The first time
the dispenser is powered, #1 is displayed. Pressing PUMP# on the control keypad changes the pump number. When the
dispenser is shut down, it remembers the pump number last displayed, and that pump number appears the next time the
dispenser is powered. Figure 6 depicts the Main Menu and its functions.
From this menu, the user can create a new program, edit a program previously saved under a known number, load a
program previously saved, or link pumps. The first time the system is started, there are no saved programs, and pressing
any arrow key other than the one under NEW or LINK results in an error message. Refer to OPERATION for instructions
to create new programs, load programs, save programs, and link pumps.
MASTER.LEX DIGI-STALTIC V#.#
PROGRAM MENU LINKED:NONE
NEW EDIT:##
Figure 6. Main Menu Flowchart
CONTRAST
LOAD LINK
6
PUMP
PUMP
#1