Scope of delivery
After unpacking all parts, check for any damage in
transit.
If you have any complaints, please contact the dealer
from whom you purchased the appliance or our
customer service.
The delivery consists of the following parts:
▯
Free-standing appliance
▯
Interior fittings (depending on model)
▯
Bag containing installation materials
▯
Operating instructions
▯
Installation manual
▯
Customer service booklet
▯
Warranty enclosure
▯
Information on the energy consumption and
noises
Installing the appliance
Transporting
The appliance is heavy. Secure in position during
transportation and installation.
Due to the weight/dimensions of the appliance and to
minimise the risk of injury and damage to the
appliance at least two persons are necessary to set-up
the appliance safely.
Installation location
Install the appliance in a dry, well ventilated room.
The installation location should neither be exposed
to direct sunlight nor near a heat source, e.g.
a cooker, radiator, etc. If installation next to a heat
source is unavoidable, use a suitable insulating plate
or observe the following minimum distances to a heat
source:
▯
3 cm to electric or gas cookers.
▯
30 cm to an oil or coal-fired cooker.
If installing the appliance next to another refrigerator
or freezer, ensure a minimum lateral distance of 25
mm to prevent the formation of condensation.
If a panel or cupboard is installed above
the appliance, ensure that a gap of 30 mm is left so
that the appliance can be pulled out of the recess
if required.
The air heated on the rear side of the appliance must
be allowed to escape unhindered.
37