Burkert 6281 EV Serie Manuel D'utilisation page 2

3. AUTHORISED USE
Non-authorized use of the solenoid valve Type 6213
EV and 6281 EV may be a hazard to people, nearby
equipment and the environment.
• The device is designed to control, shut off and meter
neutral media up to a viscosity of 21 mm
• Provided the device socket is connected and installed
correctly, e.g. Bürkert Type 2508, the device satisfies
protection class IP65 in accordance with DIN EN 60529
/ IEC 60529.
• The device may only be used in the explosion-
protected area if an appropriate additional identifica-
tion is attached to the type label.
• Use according to the authorized data, operating and
service conditions specified in the contract documents
and operating instructions. These are described in the
chapter on "Technical data".
• Correct transportation, correct storage and installation
and careful use and maintenance are essential for reliable
and faultless operation.
• Use the device only as intended.
english
4
4. BASIC SAFETY
INSTRUCTIONS
These safety instructions do not make allowance for any
• contingencies and events which may arise during the
installation, operation and maintenance of the devices.
• local safety regulations – the operator is responsible for
observing these regulations, also with reference to the
installation personnel.
Danger – high pressure!
• Before loosening the lines and valves, turn off the pres-
sure and vent the lines.
Risk of electric shock!
• Before reaching into the system, switch off the power
supply and secure to prevent reactivation.
• Observe applicable accident prevention and safety
regulations for electrical equipment!
Risk of burns/risk of fire if used for a prolonged switch-
on time through hot device surface!
• Keep the device away from highly flammable substances
and media and do not touch with bare hands.
english
6
3.1. Restrictions
If exporting the system/device, observe any existing
restrictions.
/s.
2
Risk of injury due to malfunction of valves with alter-
nating current (AC).
Sticking core causes coil to overheat, resulting in a
malfunction.
• Monitor process to ensure function is in perfect work-
Risk of short-circuit/escape of media through leaking
screw joints.
• Ensure seals are seated correctly!
• Carefully screw together coil and device socket or valve
General Hazardous Situations.
To prevent injuries:
• Ensure that the system cannot be activated unintentionally.
• Installation and maintenance work may only be carried
• The valves must be installed to the appropriate local
• Do not put any loads on the housing (e.g. by placing
• Do not make any external modifications to the device
ing order!
and connection plate!
out by authorized technicians with the appropriate tools.
standards.
objects on it or standing on it).
housings. Do not paint the housing parts or screws.
Type 6213 EV / 6281 EV
english
5
english
7