Chapter 3: Troubleshooting; Leds - Promise Technology SUPERSWAP 4100 Manuel Utilisateur

Chapter 3: Troubleshooting

• LEDs (below)
• Interpret LED Displays (page 20)
• Disk Drive Replacement (page 23)
• Fan Replacement (page 24)
• Contact Technical Support (page 25)

LEDs

Figure 1. SuperSwap 4100 has one LED for Enclosure Status and two
LEDs for each disk drive.
• The LEDs function only with the FastTrak RAID Controller.
They do not function with the SATA 150 Controller.
• As long as the PAM Software or Promise BIOS indicate that
your array status is Functional, your array is operating
normally.
Notes
19
Enclosure
Disk Drive 1
Disk Drive 2
Disk Drive 3
Disk Drive 4