Sequential Startup Option - Promise Technology SUPERSWAP 4100 Manuel Utilisateur

SuperSwap 4100 User Manual
cable from the daisy-chain OUT connector of the first SuperSwap to the
daisy-chain IN connector of the second.
Power
Connectors
11. Connect three of your computer's internal power cables to the power
connectors on the back of the SuperSwap enclosure.
Provide a direct connection to the power supply for all three SuperSwap
power connectors..

Sequential Startup Option

Sequential Startup enables SuperSwap to start one disk drive at a time in
order to eliminate a sudden heavy draw on the computer's power supply.
• Promise Technology recommends that you compare the
capacity of your Power Supply against the wattage required
by your PC plus the disk drives you plan to install in the
SuperSwap 4100. Upgrade your Power Supply if necessary.
• Do not use a Y-connector to share power between the
SuperSwap 4100 and another device or to share power
among the three power connectors on the SuperSwap 4100.
Sequential
Startup Switch
Cautions
14