Specifications - Promise Technology SUPERSWAP 4100 Manuel Utilisateur

you to hot-swap a failed drive without powering down the system while fully
protecting disk drive and internal system components.
Power
Connector
(1of 3)
SATA
Connector
(1 of 4)
Management
Connector
Daisy-Chain
Connector
(1 of 2)
Figure 2. SuperSwap 4100 Rear View.

Specifications

• Fits most 3.5-inch form factor Serial ATA hard disk drives
• Occupies three contiguous 5.25-inch component bays in PC chassis
Supports Serial ATA drives, 1.5 and 3.0 Gb/s
•
• Built-in Enclosure, Array Status and Drive Activity LED indicators
• Two dedicated cooling fans
• Durable metal construction
• Fully-ventilated drive carriers
• Unique handle design automatically disengages drive
• Housing Assembly dimensions (HWD): 4.96 x 5.75 x 8.07 inches (126 x 146
x 205 mm)
• Drive Carrier dimensions (HWD): 1.07 x 4.21 x 6.81 inches (27.2 x 107 x 173
mm)
• Operating temperatures: 32
• Operating himidity: 5% to 95% non-condensing
° ° °
to 110 F (0 C to 45
7
Chapter 1: Introduction
Fan (1of 2)
Sequential
Startup
Switch
°
C)