(On Some Models); Install Produce Preserver; Power On/Off Switch - Jennair W10728796B Guide D'utilisation

GETTING STARTED

INSTALL PRODUCE PRESERVER

(ON SOME MODELS)

The produce preserver absorbs ethylene to slow
the ripening process of many produce items.
As a result, certain produce items will stay fresh
longer.
Ethylene production and sensitivity varies
depending on the type of fruit or vegetable.
To preserve freshness, it is best to separate
produce with sensitivity to ethylene from fruits
that produce moderate to high amounts of
ethylene.
Sensitivity to
Ethylene
Apples High
Asparagus Medium
Berries Low
Broccoli High
Cantaloupe Medium
Carrots Low
Citrus Fruit Medium
Grapes Low
Lettuce High
Pears High
Spinach High
14 | GETTING STARTED
INSTALLING THE PRODUCE PRESERVER
CAUTION: IRRITANT
MAY IRRITATE EYES AND SKIN.
DANGEROUS FUMES FORM WHEN MIXED
WITH OTHER PRODUCTS.
Do not mix with cleaning products containing
ammonia, bleach or acids. Do not get in eyes,
on skin or clothing. Do not breathe dust. Keep
out of reach of children.
FIRST AID TREATMENT: Contains potassium
Ethylene
permanganate. If swallowed, call a Poison
Production
Control Center or doctor immediately. Do not
Very High induce vomiting. If in eyes, rinse with water for
15 minutes. If on skin, rinse with water.
Very Low
Low
1.
Wash the interior of a crisper drawer with a
Very Low
solution of mild dish soap and warm water,
and dry thoroughly.
High
2.
Find the package containing the Produce
Very Low
Preserver inside the refrigerator, and install
the Produce Preserver into the crisper
Very Low
drawer according to the instructions
Very Low
provided in the package.
Very Low
Very High
Very Low

POWER ON/OFF SWITCH

If you need to turn the power to your
refrigerator On or Off, you must remove the top
grille panel to access the power switch. Turn the
power to the refrigerator Off when cleaning
your refrigerator or changing light bulbs.
B A
A. Top grille
B. Cabinet sides
INTEGRATED INSTALLATION - FULL HEIGHT /
ARMOIRE MACHINE COMPARTMENT COVER
To install the grille panel to the refrigerator:
1.
Slide the upper and lower slots in each
bracket onto the mounting pins extending
upward from the top of the refrigerator.
2.
Push the grille panel forward to fully
engage the spring clips and fasten the
grille panel.
B