Vista Apex pinkwave Mode D'emploi page 6

Charging the Battery Pack
1. The PinkWave™ battery packs are partially charged when shipped. Before you turn on
and start using the device, you must insert the battery pack into the handpiece and
fully charge the battery pack before using it for the first time. The battery pack will be
fully charged within three hours.
2. When the battery pack is charging, the light on the charging base will pulsate.
Once charging is complete, the light on the charging base will stop pulsating
and remain lit.
The handpiece is designed to display the battery state to the user via the
battery indicator light.
• When the battery pack is greater than 33% charged the indication lights
Green
will be solid
• When the battery pack is less than 33% charged, the light will blink
indicating the handpiece needs to be charged as soon as possible. Once the blinking
Red light comes on, you will have approximately 20 curing cycles left before light is
completely dead.
• When the handpiece is not in use, the induction charging base securely stores and
charges the PinkWave™ unit.
6
during use.
Pulsating
Pink Light
CHARGING
Solid
Pink Light
FULLY
CHARGED
Red
during use,