Publicité
Les langues disponibles
Les langues disponibles
Always lift pans off the Induction hob - do not slide, or they may scratch the glass.
How to use
Start cooking
Touch the ON/OFF control for three seconds. After power on, the
buzzer beeps once, all displays show "-" or "- -", indicating that the
induction hob has entered the state of standby mode.
Place a suitable pan on the cooking zone that you wish to use.
• Make sure the bottom of the pan and the surface of the cooking
zone are clean and dry.
Select a heat setting by touching the "-" or "+" control.
• If you don't choose a heat setting within 1 minute, the Induction hob
will automatically switch off. You will need to start again at step 1.
• You can modify the heat setting at any time during cooking.
If the display flashes
This means that:
• you have not placed a pan on the correct cooking zone or,
• the pan you're using is not suitable for induction cooking or,
• the pan
is too small or not properly centered on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
The display " " will automatically disappear after 1 minute if no suitable pan is placed on it.
alternately with the heat setting
EN-8
Publicité
